Browsing by Author "Fulton, John W."
Now showing items 1-5 of 5
-
Fulton, John W.; Blair, William G. (Texas A&M University. Turbomachinery Laboratories, 1995)A seven stage, centrifugal compressor, for gas lift service on a North Sea oil production platform, exhibited subsynchronous shaft vibrations during full load, high density, factory tests. Pressure transducers in each stage ...
-
Fulton, John W.; Klein, John M.; Marriott, Andrew; Graham, A. David (Texas A&M University. Turbomachinery Laboratories, 2001)A two casing high-pressure injection compressor train driven by a directly coupled high-speed induction motor was tested to demonstrate satisfactory electrical, aerothermal, and rotordynamic performance. Some key test ...
-
Camatti, Massimo; Vannini, Giuseppe; Fulton, John W.; Hopenwasser, Fred (Texas A&M University. Turbomachinery Laboratories, 2003)A two casing (three-stage) high-pressure injection compressor train driven by a gas turbine via a gearbox was full load and full speed performance tested to demonstrate satisfactory aerothermal and rotordynamic performance. ...
-
Baldassare, Leonardo; Fulton, John W. (Texas A&M University. Turbomachinery Laboratories, 2007)The calculation for unbalance response of a rotor starts by calculating the bearing load to provide the basis for the bearing stiffness and damping characteristics. Measurements in test rigs at a major Texas university ...
-
Evans, B. Fred; Fulton, John W. (Texas A&M University. Turbomachinery Laboratories, 2010)To satisfy API standard 617 (2002) stability requirements, the design of centrifugal compressors must be analyzed against the Level 1 screening criteria for self-excited subsynchronous instability of the rotor lateral ...